For M.2
JJ-GM3-102M2-Fr SlimSAS 4i (SFF-8654) 1x3.5" for 2xM.2 NVMeitem number: A 2784
- SlimSAS 4i (SFF-8654) connector x 2
- Support PCIe 3.0/PCIe 4.0
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Small 4pin power connector x 2 + 2pin fan jumper x 1
- Tray: SlimSAS 8i connector
- Support SSD length 30/42/60/80mm
- Tool-less installation, or build-in screw
- With heat sink & thermal pad and 70x10mm cooling fan with 2800RPM
- Keylock design
- The BF-17 bracket required for installation in a 5.25 bay is not included, but is optional
JJ-GM3-202M2r SlimSAS 4i (SFF-8654) 1x3.5" for 4 x M.2 NVMeitem number: A 2814
- SlimSAS 4i (SFF-8654) connector x 4
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x 4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Small 4pin power connector x 4+ 2pin fan connector x 4
- Tray: SlimSAS 8i connector
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- Keylock design
JJ-GMS-104M2r SlimSAS 4i (SFF-8654) Half 5.25"for 4xM.2item number: A 2816
- 4 x SlimSAS 4i (SFF-8654) connector
- Support 4 x M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Support M.2 SSD length 2230/2242/2260/2280mm
- 1 x Mini 4pin power connector
- With 4010mm blower fan x 1 for quick heat dissipation
- With anti-vibration spring design on each swapping carrier
- Slim size aluminum frame with stainless carrier
- Aluminum cover, with thermal pads on upper & lower sides of the carrier
- Keylock design
JJ-GO3-102M2r OCuLink 4i (SFF-8612) 1 x 3.5"for 2 x M.2item number: A 2832
- Oculink 4i SFF-8612 (9402) connector x 2
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Small 4pin power connector x 2 + 2pin fan connector x 1
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- With 1 x 7010 cooling fan (2800rpm)
- Keylock design
JJ-GO3-202M2r OCuLink 4i (SFF-8612) 1 x 3.5"for 4 x M.2item number: A 2815
- Oculink 4i SFF-8612 (9402) connector x 4
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Small 4pin power connector x 4 + 2pin fan connector x 4
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- Keylock design
JJ-GZS-104M3r/GEN5 MCIO for 4 x M.2 NVMe in Half 5.25"item number: A 2841
- 2 x MCIO x8 connectors
- Support 4 x M.2 NVMe SSD (M-Key) PCIe 5.0/4.0/3.0
- Support GEN5
- Support M.2 SSD length 2230/2242/2260/2280mm
- 1 x EPS 8pin (2x4) power connector (for ATX CPU, not PCIe)
- 1 x 4010mm blower
- With anti-vibration spring design on each swapping carrier
- Slim size aluminum frame with stainless carrier
- Aluminum frame & heat sink, stainless tray, with thermal pads 8W/mK (optional 16W/mK)
- SSD Install: Standoff & Screw Installation
- Triangle Keylock design
- Power LED: Green / Access: Orange
- Form factor: Half 5,25" drive bay width
NB: The 5,25" bracket and the GEN5 switch cards shown in the picture are optional and not included