+49 2181 / 75 6 75 - 0

Industrial Products / Backplane / For 2,5" HDD

\JJ-1012M-SS SATA+SAS 12x2,5

JJ-1012M-SS SATA+SAS 12x2,5"HDD
item number: A 2369

  • For 12 x 2.5"SATA(SAS) HDD/SSD
  • Side sliding rails with vibration reducing springs
  • Support SATA and SAS primary channel
  • 8 *8cm fan * 1 with High/Low speed switch
  • Metal Key Lock for each HDD tray

    The JJ-1012M-SS allows up to 12 SATA or SAS drives to be installed into any 3 x 5.25 inch device bays for a convenient data exchange. Choice model for the multi-bay 2.5" HDD backplane. Simply rugged and high anti-vibration standard product and worry-free of the heat and vibration! Now an IPC industrial standard also for SoHo and consumers.

-- €
\JJ-1040SS  SATA+SAS 4x2,5

JJ-1040SS SATA+SAS 4x2,5"HDD RoHS
item number: A 1480

  • Compact & embedded storage applications for future needs
  • Removable mobile backplane
  • Cableless HDD connection design
  • Optimal cooling due to 2 X 4cm fan
  • RAID support

-- €
\JJ-1041SS  SATA+SAS 4x2,5

JJ-1041SS SATA+SAS 4x2,5"HDD RoHS
item number: A 2061

  • Industrial standard
  • Anti-shock protection
  • HDD thickness up to 15mm
  • Cableless HDD connection
  • Optimal cooling due to 2 x 4cm fan and air ventilation holes for best heat sink
  • Security triangle keylock for each HDD tray

-- €
\JJ-1044M-SS SATA+SAS 4 x 2,5

JJ-1044M-SS SATA+SAS 4 x 2,5" HDD
item number: A 2273

  • For 4 x 2,5 SATA(SAS) HDD/SSD
  • Simply rugged and high anti-vibration standard and worry-free of the heat and vibration!
  • Support SATA and SAS primary channel
  • Now an IPC industrial standard is also for soho and consummers
  • Providing two ways mounting holes - from sides or bottom
  • Easy drives swap in / out or for tray transportation
  • Side sliding rails with vibration reducing springs
  • For data backup, duplication, transportation, security, DVR, testing and consummers.

-- €
\JJ-1060 SATA 6x2,5

JJ-1060 SATA 6x2,5"HDD for 5,25" RoHS
item number: A 1734

  • Removable mini backplane for 6 x 2.5" HDD

-- €
\JJ-1080M-SS SATA+SAS 8x2,5

JJ-1080M-SS SATA+SAS 8x2,5"HDD
item number: A 2274

  • For 8 x 2,5 SATA(SAS) HDD/SSD
  • Simply rugged with high anti-vibration standard and worry-free of the heat and vibration!
  • IPC industrial standard for soho and consumers
  • For data backup, duplication, transportation, security, DVR and testing purposes
  • Easy drives swap in / out or for tray transportation
  • Side sliding rails with vibration reducing springs
  • Metal keylock for security

-- €
\JJ-127SS 12G SATA+SAS 12x2,5

JJ-127SS 12G SATA+SAS 12x2,5"HDD
item number: A 2559

  • Support up to 12Gbps (SAS III)
  • 3 x 5.25" Bay for 12 x 2.5" HDD/SSD
  • 3 x MiniSAS HD (SFF-8643) interface
  • Supported HDD height upto 15mm

    The Jou Jye aluminum backplane JJ-127SS supports up to 12Gbit/s and can host up to twelve hot-swap SATA/SAS HDD or SSD in one 5.25" bay.

    The front ventilating holes and the horizontal PCB design enhance the air flow inside, while the rear fan amplifies the cooling performance of this device.
    Hard drives are properly led into the cableless connection through guiding rails and are protected by anti-vibration springs on the HDD tray.
    This backplane features one rear miniSAS HD (SFF-8643) interface for connecting to a compatible controller.

    Moreover, safety and protection are provided by the metal keylock design, to prevent unauthorised access.

-- €
\JJ-47SS 12G SATA+SAS 4x2,5

JJ-47SS 12G SATA+SAS 4x2,5"HDD
item number: A 2557

  • Support up to 12Gbps (SAS III)
  • 1 x 5.25" Bay for 4 x 2.5" HDD/SSD
  • 1 x MiniSAS HD (SFF-8643) interface
  • Supported HDD height up to 15mm

    The Jou Jye aluminum backplane JJ-47SS supports up to 12Gbit/s and can host up to four hot-swap SATA/SAS HDD or SSD in one 5.25" bay.

    The front ventilating holes and the horizontal PCB design enhance the air flow inside, while two rear fans amplify the cooling performance of this device.
    Hard drives are properly led into the cableless connection through guiding rails and are protected by anti-vibration springs on the HDD tray.
    This backplane features one rear miniSAS HD (SFF-8643) interface for connecting to a compatible controller.

    Moreover, safety and protection are provided by the metal keylock design, to prevent unauthorised access.

-- €
\JJ-52SSU3 SAS/SATA 2x2,5

JJ-52SSU3 SAS/SATA 2x2,5" HDD+4xUSB3.0 Black
item number: A 2569

  • 1 x 5,25" for 2 x 2,5" HDD/SSD + 4 x USB3.0
  • Support SAS (III/II/I) SATA (III/II/I), 12Gbps
  • Hot-swap dual channel SAS/SATA interface
  • Support up to 15mm HDD height
  • Metal key lock design
  • Anti-vibration & EMI Grounding structure
  • Multi colour LED indicator

    This module is an ideal solution to upgrade your system with an enterprise graded backplane, which enables two pieces 2,5" SAS/SATA HDD/SSD to match in a 5,25" standard form factor drive bay and to enjoy up to 12Gbps data transfer.
    Besides, you can benefit of four SuperSpeed USB3.0 ports, of course downward compatible with USB2.0.

    The anti-vibration design absorbs the vibrations arising from the hard drives during operation and contributes decisively to reduce the noise. This high reliable module is equipped with a 2-segment metal key lock to safeguards the hard drives from unauthorized personnel.

-- €
\JJ-87SS 12G SATA+SAS 8x2,5

JJ-87SS 12G SATA+SAS 8x2,5"HDD
item number: A 2558

  • Support up to 12Gbps (SAS III)
  • 2 x 5.25" Bay for 8 x 2.5" HDD/SSD
  • 2 x MiniSAS HD (SFF-8643) interface
  • Supported HDD height up to 15mm

    The Jou Jye aluminum backplane JJ-87SS supports up to 12Gbit/s and can host up to eight hot-swap SATA/SAS HDD or SSD in one 5.25" bay.

    The front ventilating holes and the horizontal PCB design enhance the air flow inside, while the rear fan amplifies the cooling performance of this device.
    Hard drives are properly led into the cableless connection through guiding rails and are protected by anti-vibration springs on the HDD tray.
    This backplane features one rear miniSAS HD (SFF-8643) interface for connecting to a compatible controller.

    Moreover, safety and protection are provided by the metal keylock design, to prevent unauthorised access.

-- €

Industrial Products / Backplane / For 3,5" HDD - SATA / SAS

\JJ-2132M-SS SATA+SAS, black 2/3 HDD\

JJ-2132M-SS SATA+SAS, black 2/3 HDD
item number: A 2275

  • Anti-vibration design
  • Double HDD tray security / metal lock and sliding lock
  • Suitable for both 3,5" and 2,5" HDD/SSD
  • Easy swapping in/out
  • Aluminum body and Aluminum tray
  • For IPC industrial standard and SoHo

    The Railway Series can host upto 5 x 3,5" or 2,5" SATA/SAS drives and can be installed into any 2 x or 3 x 5,25" bay space.

    This simply rugged backplane series, with the revolutionary anti-vibration spring rails, protects your hard drive and connector against damage, while your data keep safe and cool thanks the high stability and heat-dissipation design.
    The backplanes are equipped with LED indication for fan failure and overheating and each drive with an individual LED indication for power on and blinking for accessing.

    The Railway backplanes are recommended for industrial and common use.

-- €
\JJ-3052M-SS SATA+SAS, black 3/5 HDD\

JJ-3052M-SS SATA+SAS, black 3/5 HDD
item number: A 2277

  • Anti-vibration design
  • Double HDD tray security / metal lock and sliding lock
  • Suitable for both 3,5" and 2,5" HDD/SSD
  • Easy swapping in/out
  • Aluminum body and Aluminum tray
  • For IPC industrial standard and SoHo

    The Railway Series can host upto 5 x 3,5" or 2,5" SATA/SAS drives and can be installed into any 2 x or 3 x 5,25" bay space.

    This simply rugged backplane series, with the revolutionary anti-vibration spring rails, protects your hard drive and connector against damage, while your data keep safe and cool thanks the high stability and heat-dissipation design.
    The backplanes are equipped with LED indication for fan failure and overheating and each drive with an individual LED indication for power on and blinking for accessing.

    The Railway backplanes are recommended for industrial and common use.

-- €
\JJ-3142M-SS SATA+SAS, black 3/4 HDD\

JJ-3142M-SS SATA+SAS, black 3/4 HDD
item number: A 2276

  • Anti-vibration design
  • Double HDD tray security / metal lock and sliding lock
  • Suitable for both 3,5" and 2,5" HDD/SSD
  • Easy swapping in/out
  • Aluminum body and Aluminum tray
  • For IPC industrial standard and SoHo

    The Railway Series can host upto 5 x 3,5" or 2,5" SATA/SAS drives and can be installed into any 2 x or 3 x 5,25" bay space.

    This simply rugged backplane series, with the revolutionary anti-vibration spring rails, protects your hard drive and connector against damage, while your data keep safe and cool thanks the high stability and heat-dissipation design.
    The backplanes are equipped with LED indication for fan failure and overheating and each drive with an individual LED indication for power on and blinking for accessing.

    The Railway backplanes are recommended for industrial and common use.

-- €
\JJ-M0104 1U 4x3,5

JJ-M0104 1U 4x3,5"HDD Backplane module
item number: A 2448

  • Backplane module for 4 x 3.5"(or 2.5") HDD/SSD
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • Full SAS dual channel
  • Hot swappable HDD tray


    Features of the storage module.

    - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indications for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD This storage module has been designed for hosting 4x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-M0112 1U 12x2,5

JJ-M0112 1U 12x2,5"HDD Backplane module
item number: A 2512

  • Backplane module for 12 x 2.5" HDD/SSD
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • Full SAS dual channel
  • Hot swappable HDD tray

    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs


    This storage module has been designed for hosting 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-M0208 2U 8x3,5

JJ-M0208 2U 8x3,5"HDD Backplane module
item number: A 2449

  • Backplane module for 8 x 3.5"(or 2.5") HDD/SSD
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • Full SAS dual channel
  • Hot swappable HDD tray


    Features of the Storage Module
    - Organised group for miniSAS connections
    - Digital numbers for group or RAID organising
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexible to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD
    - Stainless HDD tray with plastic handle and security keylock


    This storage module has been designed for hosting 8x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-M0212 2U 12x3,5

JJ-M0212 2U 12x3,5"HDD Backplane module
item number: A 2450

  • Backplane module for 12 x 3.5"(or 2.5") HDD/SSD
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • Full SAS dual channel
  • Hot swappable HDD tray


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage module has been designed for hosting 12x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-M0224 2U 24x2,5

JJ-M0224 2U 24x2,5"HDD Backplane module
item number: A 2513

  • Backplane module for 24 x 2.5" HDD/SSD
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • Full SAS dual channel
  • Hot swappable HDD tray


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs


    This storage module has been designed for hosting 24 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\ST-2131SS SATA /SAS, beige 2/3 HDD RoHS\

ST-2131SS SATA /SAS, beige 2/3 HDD RoHS
item number: A 1327

  • Cableless connection
  • Fan failure sensor
  • Overheating alarm
  • Optimal cooling due to 8 cm turbo cooling fan

-- €
\ST-2131SS SATA /SAS, black 2/3 HDD RoHS\

ST-2131SS SATA /SAS, black 2/3 HDD RoHS
item number: A 1328

  • Cableless connection
  • Suitable for both 3,5" and 2,5" HDD/SSD
  • Fan failure sensor
  • Overheating alarm
  • Optimal cooling due to 8 cm turbo cooling fan

-- €
\ST-2335TL SATA/SAS  trayless black 2/3HDD\

ST-2335TL SATA/SAS trayless black 2/3HDD
item number: A 2156

  • Black aluminum-body with Black panel
  • Trayless design for 3.5" HDD
  • Triangle metal key-lock design
  • Support SATAI/II/III
  • 2 * 5.25Bay for 3*3.5" Hard drives
  • 15pin SATA-power connector
  • With 70x70x15mm (2800RPM) Cooling Fan
  • With HDD LED & Fan Control Switch

-- €
\ST-3051SS SATA/SAS -3bay/5HDD black RoHS\

ST-3051SS SATA/SAS -3bay/5HDD black RoHS
item number: A 1337

  • Sata to Sata and SAS
  • Suitable for both 3,5" and 2,5" HDD/SSD
  • Cableless connection
  • Fan failure sensor
  • Overheating alarm
  • Optimal cooling due to 8 cm turbo cooling fan

-- €
\ST-3141SS SATA /SAS, beige 3/4 HDD RoHS\

ST-3141SS SATA /SAS, beige 3/4 HDD RoHS
item number: A 1355

  • Cableless connection
  • Fan failure sensor
  • Overheating alarm
  • Optimal cooling due to 8 cm turbo cooling fan

-- €
\ST-3141SS SATA /SAS, black 3/4 HDD RoHS\

ST-3141SS SATA /SAS, black 3/4 HDD RoHS
item number: A 1329

  • Cableless connection
  • Suitable for both 3,5" and 2,5" HDD/SSD
  • Fan failure sensor
  • Overheating alarm
  • Optimal cooling due to 8 cm turbo cooling fan

-- €
\ST-3435TL SATA/SAS  trayless black 3/4HDD\

ST-3435TL SATA/SAS trayless black 3/4HDD
item number: A 2157

  • Black aluminum-body with Black panel
  • Trayless design for 3.5" HDD
  • Triangle metal key-lock design
  • Support SATAI/II/III
  • 3 * 5.25Bay for 4*3.5" Hard drives
  • 15pin SATA-power connector
  • With 2400RPM 8*8cm Cooling Fan
  • With HDD LED & Fan Control Switch

-- €
\ST-3535TL SATA/SAS  trayless black 3/5HDD\

ST-3535TL SATA/SAS trayless black 3/5HDD
item number: A 2572

  • Black aluminum-body with Black panel
  • Trayless design for 3.5" HDD
  • Triangle metal key-lock design
  • Support SATAI/II/III
  • 3 x 5,25" Bay for 5 x 3.5" Hard drives
  • 15pin SATA-power connector
  • With 2400RPM 8*8cm Cooling Fan
  • With HDD LED & Fan Control Switch

-- €

Industrial Products / Mobile Rack / For 2,5" HDD

\JJ-1225SATA Mobile Rack black RoHS\

JJ-1225SATA Mobile Rack black RoHS
item number: A 1333

  • 2 x 2.5" HDD (SSD*) built on a convenient aluminum mobile rack
  • Enables 2.5" SATA drives to be fit on a 3.5" standard form factor drive bay (floppy size space) in any desktop, rackmount or IPC
  • Cableless HDD connection
  • Support up to 9.5mm height
  • For internal use only *SSD Solid State Drive (flash based drive)

-- €
\JJ-2225TL SATA Mobile Rack black RoHS\

JJ-2225TL SATA Mobile Rack black RoHS
item number: A 2367

  • 2 x 2.5" HDD (SSD*) aluminum mobile rack with keylock
  • Enables 2.5" SATA HDD/SSD* to be fit on a 3.5" standard form factor drive bay (floppy size space) in any desktop PC or rackmount chassis
  • Reliable metal key lock to safeguard the HDD/SSD
  • Support up to 9.5mm height
  • Support SATAI/II/III HDD/SSD, 6Gbps
  • Cableless HDD connection
  • Enhanced air flow design
  • With LED switch

    Trayless design to enhance the airflow and high quality aluminum body to maximize heat sinking. An ideal solution for any floppy-swap-bay for high-end applications, SoHo and consumers.

    *SSD Solid State Drive (flash based drive)

-- €
\ST-1111SS SATA/SAS Mobile rack  black RoHS\

ST-1111SS SATA/SAS Mobile rack black RoHS
item number: A 1879

  • 1 x 2.5" HDD(SSD) built on a convenient 3.5" mobile rack
  • Compatible with SATA-III 6.0 Gbit/s, SAS II 6.0 Gbit
  • It can support the HDD height from 9.5mm ~ 15mm
  • Supports SATA, SAS 2.5" HDD and SATA SSD
  • Cableless HDD connection

-- €

Industrial Products / Mobile Rack / For 3,5" HDD

\JJ-137M-SS SATA/SAS, Alu black RoHS\

JJ-137M-SS SATA/SAS, Alu black RoHS
item number: A 2368

  • Support SATAI/II/III & SAS I,II 6Gbps
  • With rugged anti-vibration level guiding rails to absorb all direction vibration
  • For 1 x 2,5 or 3,5 SSD/HDD in 1x5,25 bay

    HDD mobile rack with easy swap in/out tray for data backup, duplication, security, DVR or testing, for industrial and consumer purposes. Built up a reliable enterprise data center for large-scale replicated environments on this rugged anti-vibration module(s).

-- €
\JJ-M0101 Single HDD rack black\
-- €
\ST-1120SS SATA for 1U black RoHS\

ST-1120SS SATA for 1U black RoHS
item number: A 2492

  • Aluminum
  • For 1 x 3,5 or 2,5 / With keylock
  • Support SATA & SAS 6Gbps
  • Cableless connection
  • Anti-vibration guiding rails

    Mechnical keylock & sliding door for safety
    Supports Plug & Play / hot swappable
    With 2 LED for Power & HDD access

-- €
\ST-133 ATA133,1*fan, Alu,IDE, beige RoHS\

ST-133 ATA133,1*fan, Alu,IDE, beige RoHS
item number: A 913

  • Optimal cooling due to 1 rear fan
  • Cableless connection
  • Magic handle - auto in/out

-- €
\ST-135 SAS&SATA, Alu updated black RoHS\

ST-135 SAS&SATA, Alu updated black RoHS
item number: A 1086

  • Compatible with both SATA or SAS 3,5 HDD
  • SAS II, SAS I, SATA-III, SATA-II, SATA-I / up to 6.0 Gbit/s
  • Optimal cooling due to 1 x 4cm front fan
  • Cableless connection
  • Magic handle - auto in/out
  • New version

-- €
\ST-136SS SATA & SAS black updated RoHS\

ST-136SS SATA & SAS black updated RoHS
item number: A 1437

  • Compatible with both SATA or SAS 2,5 / 3,5 HDD
  • Optimal ventilation due to 8cm turbo cooling fan
  • Cableless HDD connection
  • Aluminum design

-- €
\ST-166TL SATA/SAS trayless Mobile Rack black\

ST-166TL SATA/SAS trayless Mobile Rack black
item number: A 2155

  • Silver aluminum-body
  • Trayless design for 3.5" HDD
  • Triangle metal key-lock design
  • Support SATA I / II / III, SAS I,II
  • 15 pin SATA power connector
  • With HDD LED switch
  • With extra power slot for optional fan
  • Fanless design to keep HDD stable

-- €

Industrial Products / Rackmount / 4U

\JJ-R42328 4U 16x3,5

JJ-R42328 4U 16x3,5" HDD+12x2,5"HDD IPC Case+Backpl.module
item number: A 2510

  • For 4U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 7
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage chassis has been designed for hosting 16 x 3,5" or 2,5" HDD + 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R42336 4U 12x3,5

JJ-R42336 4U 12x3,5" HDD+24x2,5"HDD IPC Case+Backpl.module
item number: A 2511

  • For 4U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 9
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage chassis has been designed for hosting 12 x 3,5" or 2,5" HDD + 24 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R4248 4U 48x2,5

JJ-R4248 4U 48x2,5" HDD IPC Case+Backpl.module
item number: A 2508

  • For 4U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 12
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs


    This storage chassis has been designed for hosting 48 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R4324 4U 24x3,5

JJ-R4324 4U 24x3,5" HDD IPC Case+Backpl.module
item number: A 2509

  • For 4U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 6
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage chassis has been designed for hosting 24 x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\NU-R9400D40S 4U Rackmount Short / Black\

NU-R9400D40S 4U Rackmount Short / Black
item number: A 2474

  • 4U up to ATX size motherboard
  • 7 x full height PCI slots
  • 4 x 5,25 ext. + 4 x 2,5 + 2 x 3,5 int.
  • Easy removable and washable dust filter
  • 4 x 80mm ball bearing fans
  • Support PS2, PS3 and mini red. PSU


    Despite its space saving design, this 4U rackmount chassis with only 16 depth, includes four fans, two front USB, four 5.25” open bay and four 3.5” or eight 2.5" hidden bays and comes with 7 full height PCI slots. This chassis can host PS2, PS3 and mini-redundant power supply format and it supports different versions of standard ATX, micro ATX or mini ITX motherboards.


    Customization
    It features four 5.25" open bays, four 3.5" or eight 2.5" hidden bay with HDD bracket for custom configuration of different applications. The 7 full height PCI slots support PCI, PCI 64bits, AGP, and PCI-Express add-on cards which enable expansion and upgrades for specialized functions and tasks.


    Dust Filter
    The chassis includes an easy way to clean up the filter from dust and dirt that may hinder the optimal operation in your server chassis. The washable filter is strategically placed behind the fans in front of the chassis just behind the front bezel.


    Cooling Fans
    The chassis is equipped with 2x 80mm front and 2x 80mm rear fans to provide cool air intake to extend the lifecyle of the internal components of the system.

-- €
\"NU-R9401

NU-R9401 4U 19"
item number: V0000125

  • With 14-Slot rear panel
  • Removable air filter
  • Add-on cards retainer

\"NU-R9401B

NU-R9401B 4U 19
item number: V0000129

  • With 14-Slot rear panel
  • Removable air filter

Industrial Products / Rackmount / 3U

\JJ-R32324 3U 12x3,5

JJ-R32324 3U 12x3,5" HDD+12x2,5"HDD IPC Case+Backpl.module
item number: A 2507

  • For 3U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 6
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage chassis has been designed for hosting 12 x 3,5" or 2,5" HDD + 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R3236 3U 36x2,5

JJ-R3236 3U 36x2,5" HDD IPC Case+Backpl.module
item number: A 2505

  • For 3U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 9
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs


    This storage chassis has been designed for hosting 36 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R3316 3U 16x3,5

JJ-R3316 3U 16x3,5" HDD IPC Case+Backpl.module
item number: A 2506

  • For 3U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 4
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage chassis has been designed for hosting 16 x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\NU-R9300D38P 3U Rackmount Short / Black\

NU-R9300D38P 3U Rackmount Short / Black
item number: A 2472

  • 3U up to ATX size motherboard
  • 4 x full height PCI slots
  • 3 x 5,25 ext. + 3 x 2,5 or 2 x 3,5 int.
  • Easy removable and washable dust filter
  • 3 x 80mm front ball bearing fans


    Despite its space saving design, this 3U rackmount chassis with only 15 depth, includes three front fans, dust filter, two front USB ports, three 5.25” open bay and two 3.5” or three 2.5" hidden bays, four full height expansion slots.
    The four full height PCI slots support PCI, PCI 64bits, AGP, and PCI-Express add-on cards, which enable expansion and upgrades for specialized functions and tasks.
    This rackmount chassis is compatible with either ATX, micro ATX or mini-ITX motherboards.


    Dust Filter
    The chassis includes an easy way to clean up the filter from dust and dirt that may hinder the optimal operation in your server chassis. The washable filter is strategically placed in front and on top of the chassis just behind the front bezel and top cover.


    Cooling fans
    The chassis is equipped with 3x 80mm fans to provide cool air from the exterior and extend the lifecyle of the internal components of the system.

-- €
\NU-R9300D5546 3U Rackmount E-ATX / Black\

NU-R9300D5546 3U Rackmount E-ATX / Black
item number: A 2473

  • 3U up to EATX 12" x 13" size motherboard
  • 7 x full height PCI slots
  • 6 x 5,25 ext. + 6 x 3,5 int.
  • Easy removable and washable dust filter
  • 2 x 80mm ball bearing fans


    This rackmount chassis supports up to 12" x 13" EATX Motherboard. It features four 5.25" bays for custom configuration of different applications. Web server, high performance super computing or database server, this chassis can accomodate the thermal requirement and drive storage needed and comes with seven PCI slots.


    The PCI slots support PCI, PCI 64bits, AGP, and PCI-Express add-on cards, which enable expansion and upgrades for specialized functions and tasks.

-- €

Industrial Products / Rackmount / 2U

\JJ-R2224 2U 24x2,5

JJ-R2224 2U 24x2,5"HDD IPC Case+Backpl.module
item number: A 2454

  • For 2U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 6
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs


    This storage module has been designed for hosting 24 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R22316 2U 4x3,5

JJ-R22316 2U 4x3,5"HDD+12x2,5"HDD IPC Case+Backpl.module
item number: A 2452

  • For 2U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 4
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage module has been designed for hosting 4 x 3,5" or 2,5" HDD + 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R2308 2U 8x3,5

JJ-R2308 2U 8x3,5"HDD IPC Case+Backpl.module
item number: A 2437

  • For 2U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 2
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organised group for miniSAS connections
    - Digital numbers for group or RAID organising
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexible to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD
    - Stainless HDD tray with plastic handle and security keylock


    This storage module has been designed for hosting 8x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R2312 2U 12x3,5

JJ-R2312 2U 12x3,5" HDD IPC Case+Backpl.module
item number: A 2438

  • For 2U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 3
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage module has been designed for hosting 12x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\NU-R9200D35H 2U Rackmount Short / Black\

NU-R9200D35H 2U Rackmount Short / Black
item number: A 2470

  • 2U for micro ATX and mini ITX M/B
  • 3 x low profile PCI slots
  • 2 x 5,25 bay compatible with 3 x HDD hot swap
  • Easy removable and washable dust filter
  • 2 x 80mm front ball bearing fans
  • For micro PS3 PSU (not included)


    This 2U rackmount chassis is built with a space saving design and includes 3 low profile expansion slots, filter cleaner, 2 x 80mm interior exhaust fans, Hot Swap features and is compatible with micro ATX and ITX motherboards

    With its stunning look and reduced size, system designers will be amazed by the flexibility and capabilities of this rackmount.


    Hot SWAP Capability
    The chassis comes with 2 x 5.25” open bay and is compatible with 3 bay backplanes. This potentially allows up to 3x Hot Swappable hard drives to create a portable and light data storage system.

    Dust Filter


    The chassis includes an easy way to clean up the filter from dust and dirt that may hinder the optimal operation in your server chassis. The washable filter is strategically placed in front of the chassis just behind the front bezel and top cover.

    Compatibility
    Having extra depth and space, it makes it easier for this 2U to include different motherboard form factors. With its flexibility the rackmount is compatible with Micro ATX (9.6” x 9.6”) and ITX (6.7”x 6.7”) motherboards.

    Low Profile Slots
    Understanding the need to use as much hardware as possible into a compact rackmount, the 2U adds 3x low profile slots for PCI-E hardware to enable the use of additional components for different server needs.

    Cooling fans
    The chassis is equipped with 2x 80mm front interior fans to provide cool air from the exterior and extend the lifecyle of the internal components of the system.

-- €
\NU-R9200D35H7A 2U Rackmount Short / Black\

NU-R9200D35H7A 2U Rackmount Short / Black
item number: A 2471

  • 2U up to ATX size motherboard
  • 7 x low profile PCI slots
  • 1 x 5,25 bay + 2 x int. 3,5 anti-vibration HDD brackets
  • Easy removable and washable dust filter
  • 2 x 80mm front ball bearing fans
  • For Flex ATX PSU (different wattage available)


    This 2U rackmount server chassis is designed for space saving (14” long) environments, nevertheless it is equippied with 7x low profile expansion slots, washable air filter, 2 x 80mm cooling fans and black silky aluminum front bezel. With its stunning looks and compact size, system designers will be amazed by the flexibility and capabilities of this 2U rackmount chassis.


    Motherboard Compatibility
    This rackmount chassis is compatible with ATX (12” x 9.6”), Micro ATX (9.6” x 9.6”) and Mini-ITX (6.7”x 6.7”) motherboards.

    Drive Bay & Front Control Panel Expendability
    Several features round off the specifications of this chassis with 2 x 3.5” internal drive bays with anti-vibration HDD brackets and 1 x 5.25” external drive bay. The front control panel features 2 x USB 2.0 ports, Power On/Off switch, System Reset switch, HDD Access and Power On LED indicators.

    Power Supply Form Factor Compatibility
    The chassis can host Flex ATX form factor power supply.

    Expansion Slots
    The chassis is provided with 7x low profile slots for PCI-E add-in cards to enable the use of riser cards and additional components for different server needs.

    Cooling fans
    The chassis is equipped with 2x 80mm front interior fans to provide cool air from the exterior and extend the lifecyle of the internal components of the system.

    Dust Filter
    The chassis includes an easy way to clean up the filter from dust and dirt that may hinder the optimal operation in your server chassis. The washable filter is strategically placed in front and on top of the chassis just behind the front bezel and top cover.

-- €

Industrial Products / Rackmount / 1U

\JJ-R1212 1U 12x2,5

JJ-R1212 1U 12x2,5"HDD IPC Case+Backpl.module
item number: A 2453

  • For 1U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 3
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indication for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs


    This storage module has been designed for hosting 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\JJ-R1304 1U 4x3,5

JJ-R1304 1U 4x3,5"HDD IPC Case+Backpl.module
item number: A 2436

  • For 1U 19" Rackmount chassis
  • Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
  • MiniSAS connector x 1
  • Full SAS dual channel
  • With anti-vibration spring on the front tray and plastic cushion points on both side-tray


    This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module.
    The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage.
    It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.


    Features of the Storage Module
    - Organized group for miniSAS connections
    - Digital numbers for group or RAID organizing
    - LED indications for power, accessing and overheating
    - Air-ventilation holes design on the front panel, PCB and the bottom side
    - Horizontal way PCB design for volume hot air to pass through
    - Flexable to change HDD modules on rackmount chassis
    - Easy swap in/out between the group HDDs
    - Combination backplane modules with 3.5" HDD and 2.5" HDD


    This storage module has been designed for hosting 4x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.


    This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!

-- €
\NU-R9100D25DR 1U Rackmount / Black\

NU-R9100D25DR 1U Rackmount / Black
item number: A 2468

  • 1U mini-server / for mini ITX M/B
  • Support FLEX power supply
  • PCI slot facilitates system upgrade
  • Noise minimization


    Mini-server with great flexibility for small business. Among its numerous applications, this product fits perfectly as a Network / Security Appliance, Web / Email Server or Telephony / Telecom / VoIP Server.
    The 5.25’’ external bay allows system administrators to install a hard drive module, optical disc drive or other applications based requirements.

    This ultra-quiet and extremely cost-effective rackmount chassis is compatible with FLEX power supplies.


    Features
    - PCI slot facilitates system upgrade
    - Space-saving compact chassis design
    - Noise minimization
    - Compatibility with 200W to 400W power supply


    In order to provide more options in upgrading the system, this chassis is equipped with a PCI slot on the rear side of the chassis.

    Aside from providing outstanding cooling performance, the chassis is equipped with ultra-low noise cooling fans. Incorporating a reliable and user-friendly case with highly-efficient 80PLUS certified power supplies, the combination is ideal for various types of applications.

-- €
\NU-R9100D38DD 1U Rackmount Dual System / Black\

NU-R9100D38DD 1U Rackmount Dual System / Black
item number: A 2469

  • 1U mini-server
  • Support 2 x mini ITX motherboards
  • Support 2 x Flex ATX PSU
  • Easy removable and washable dust filter
  • Incl. 4 x 40mm front and 4 x side fans


    Dual system mini-server series.

    With its unique interior arrangement, it is able to support up to two ITX motherboards.
    For maintenance and cooling, the chassis is equipped with removable and washable dust filters. Including 4x front and 4x side 40mm ball bearing fans, cooling is not a problem for high end applications.

    The chassis can be equipped with two built-in Flex ATX power supplies. Incorporating a reliable case with an efficient 80PLUS certified power supply, this combination is an ideal solution for different applications.


    Dust Filter

    The chassis includes an easy way to clean up the filter from dust and dirt that may hinder the optimal operation in your server chassis. The washable filter is strategically placed in front of the chassis just behind the front bezel and top cover.

    The chassis comes with 4x 40mm front intake and side exhaust fans that will keep the server cool by distributing cool air flow onto the motherboard and the hard drives.

-- €

Industrial Products / Rackmount / 1U Console

\HD AW-1701HD 1U 17,3

HD AW-1701HD 1U 17,3" LCD Monitor K/M Drawer
item number: A 2464

  • 1U 17.3" "Full HD" LCD monitor with LED backlight / 1 Port
  • Adjustable depth from 640mm to 1100mm mounting rail
  • 3 x USB 2.0 front ports
  • Monitor open angel 0° - 105°
  • Easy handles one-person installation with included mounting brackets
  • Compatible with most KVM Switches by standard USB connectors for keyboard and touchpad
  • High resolution up to 1920 x 1080 at 60Hz
  • OSD menu chooses from following languages, German, English, Spanish, Italian, Cyrillic, Japanese, Traditional Chinese, Simple Chinese
  • Supports multiple operating systems, including Windows 2000, ME, XP, Vista, 7, 8 and higher, Server, Linux, FreeBSD, and many others
  • Chrome-plated metal handle

    Keyboard Sellection: The following variants in Stock : German (DE), us-english (U.S.), French (FR), Spanish (SP), Italian (IT), Swedish / Finnish (SW) and Russian (RU).
    Variants available on request : uk-English (UK), Danish (DK), Swiss (CH), Thai (TH), Turkish (TK), Japanese (JP), Chinese (CI), Belgian (BE), Norwegian (NO), Portuguese (PT ), French / Canadian (CA) and Israeli / Hebrew (IS). Trackball is suitable for Cherry G84-4400 Trackball Keyboard

-- €
\HD EM-817TU 1U 17

HD EM-817TU 1U 17" LCD-Display Keyb.-Drawer 8 Port KVM
item number: A 2528

  • 17“ LCD-Monitor / LED backlight , Keyboard-Drawer with integreated 8 Port KVM
  • High graphic resolution, up to 1280 x 1024 with 60Hz DDC, DDC2 and DDC2B
  • Adjustable depth from 555mm up to 935mm tread depth
  • The KVM switch reflects the monitor identifiers (DDC / EDID to all ports permanently and the computer can reboot at any time and the resolution is still always displayed correctly
  • Full-time DDC Support = Monitor-Emulation = every server is the "original" permanent faked connected display to the KVM switch to avoid problems with boats in background.

-- €
\HD KAB-102-4 1.8m VGA Keyb./Mouse Cable-Set VGA+USB+PS2\
-- €
\HD KAB-103-4 3.0m VGA Keyb./Mouse Cable-Set VGA+USB+PS2\
-- €
\HD KAB-105-4 5.0m VGA Keyb./Mouse Cable-Set VGA+USB+PS2\
-- €
\HD KB-117E 1U 17

HD KB-117E 1U 17" LCD-Display Keyboard-Drawer Short
item number: A 2463

  • 1U drawer case 430mm depth / 1 Port
  • 17" RGB analog LCD Display /1280x1024 / 300 cd/m² brightness
  • Integreated telescope-rails
  • Varions mounting slides for any 1U (17“) Rack
  • Front panel lockable
  • Supports multiple operating systems, including Windows 2000, ME, XP, Vista, 7, 8, Server, Linux, FreeBSD, and many others

-- €
\HD Korat-1701 1U 17

HD Korat-1701 1U 17" LCD-Display Keyboard-Drawer
item number: A 2462

  • 1U 17“ LCD-Monitor Keyboard-Drawer with Dual-Rail Slides / 1 Port
  • LCD-Display and Keyboard separately retractable
  • Flexible External Mouse
  • RGB analog LCD-Display up to 1280 x 1024 with 300 cd / m² brightness
  • Monitor and Keyboad work separately
  • Supports Microsoft Intellimouse, Logitach First Mouse+, Mouse Man+, and others
  • Supports multiple operating systems, including Windows 2000, ME, XP, Vista, 7, 8, Server, Linux, FreeBSD, and many others

-- €

Industrial Products / Replacement tray / For 3,5" HDD

\Single tray f. ST-125SATA plastic black RoHS\
-- €
\Single tray f. ST-135SATA Alu Black RoHS\
-- €
\Single tray for ST-2131/3141/3051/136 Black RoHS\

Single tray for ST-2131/3141/3051/136 Black RoHS
item number: A 881

  • Aluminum
  • For 3.5" or 2.5" SATA I/II/III or SAS I/II HDD
  • Support SATA/SAS HDD transfer rate up to 6Gbps

-- €