+49 2181 / 75 6 75 - 0

Cooler R25 Intel 2011 - 1U Vaper Chamber Active RoHS

item no.: A 2337

Product in stock
-- €
send inquiry for this product
  • Description
  • Specs
  • Downloads
  • Related Products

  • For Narrow ILM Mounting only / 56 x 94mm mounting pitch
  • For Intel® Sandy Bridge ES-2600 & 4600 Series Processors upto 160Watt
  • Copper based Vapor chamber heatsink with copper stacked fin
  • SPECIFICATIONS:
    Application
    Socket 2011 (Narrow Type, 56 x 94mm mounting pitch)
    CPU Intel® Sandy Bridge ES-2600 & 4600 Series Processors up to  (for Narrow ILM Mounting Only) up to 160 Watts
    Technical Data
    Overall dimension 106.0 x 84.0 x 27.5  mm
    Weight 470 g
    Heat Sink 
    Material Copper  based Vapor chamber heatsink with copper stacked fin
    Fan
    Dimension 80x 80 x 15 mm
    Speed At Duty Cycle 20%: 1000 RPM
    At Duty Cycle 50%: 3500 RPM
    At Duty Cycle 100%: 7000 RPM
    Bearing 2 Ball Bearing
    Rated Voltage 12 V
    Power At Duty Cycle 20%: 0.6 W
    At Duty Cycle 50%: 3.84 W
    At Duty Cycle 100%: 19.2 W
    Air Flow At Duty Cycle 20%: 6.5 CFM
    At Duty Cycle 50%: 11.2 CFM
    At Duty Cycle 100%: 22.28 CFM
    Noise Level At Duty Cycle 20%: 21.5 dBA
    At Duty Cycle 50%: 43.0 dBA
    At Duty Cycle 100%: 59.14 dBA
    Air Pressure At Duty Cycle 20%: 2.27 mm-H2O
    At Duty Cycle 50%: 18.56 mm-H2O
    At Duty Cycle 100%: 74.18 mm-H2O
    Lead Wire Pin Out Pin1- (-)
    Pin2- (+)
    Pin3- (Techometer/Signal output)
    Pin4- (PWM)
    Note:
    1. for Narrow ILM Mounting Only, mounting pitch 56 x 94mm
    2. Support CPU Power up to 160 Watts
    3. Shin-Etsu G751 Pre-Printed.
    4. RoHS Compliance
    5. Backplate / Back Strips is not included.